Carrier-Q7-D03

Carrier Board for Qseven® and μQseven® Rev 2.1 Modules in embedded NUC™ Form factor . (Formerly CQ7-D03 )

Feuille de données

Contactez-nous pour plus d’informations et un devis

Contactez-nous

Détails produit

Info technique

Description	Carrier Board for Qseven® and μQseven® Rev 2.1 Modules in embedded NUC™ Form factor
Interfaces vidéo	LVDS Dual Channel 24-bit + backlight connector HDMI® connector
Stockage masse	microSD Slot
Réseau	1 x Gigabit Ethernet connectors 1 x Mini-PCIe Slot for WWAN Modem Modules, connected to on-board microSIM slot
Usb	1 x USB 2.0 Host port on Type-A socket 1 x USB 3.0 Host ports on Type-A socket shared with USB 2.0 OTG Client 1 x USB 2.0 OTG port on micro-AB socket shared with USB 3.0 Host 1 x USB 2.0 Host port on internal connector 1 x USB 2.0 Host port on M.2 Socket 1 KeyE Slot 1 x USB 2.0 Host port on mini-PCIe Slot
Pci	1 x PCIe x1 lane on M.2 Socket 1 Key E Slot 1 x PCIe x1 lane on Mini-PCIe Slot
Audio	Optional combo TRSS audio connector Mic in/Stereo out
Ports sériels	Optional 4-wires RS-232 / RS-422 / RS-485 configurable serial port on pin header
Autres Interfaces	Optional 1 x CAN port on pin header 1 x PCIe x1 lane on M.2 Socket 1 Key E Slot 1 x PCIe x1 lane on Mini-PCIe Slot 1 x 40 pin connector for I2C, SPI and General Purpose I/O, pinout compatible with the Raspberry Pi - GPIO Connector 1 x LED driver connector 4-wires FAN connector configurable microSIM Slot for miniPCIe Modem Debug USB port on micro-AB socket MFG connector for JTAG programming of Qseven® module
Alimentation	12VDC through USB Type-C connector Coin cell battery Holder for CMOS and RTC
Température de fonctionnement	0°C ÷ +70°C * *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensions	embedded NUC™ compliant: 101.6 x101.6 mm (4”x4”)

Documentation

Data Sheet	[Datasheet] Carrier-Q7-D03 Rel 1.0
Image	[Picture] CQ7-D03_back [Picture] CQ7-D03_perspective [Picture] CQ7-D03_front
Manual	[Manual] CQ7-D03 Rev.1.1

Vous n'avez pas trouvé la solution que vous cherchez?

Le produit standard ne répond pas à vos besoins? SECO est à votre disposition pour développer ensemble une solution hardware et logicielle partiellement ou entièrement personnalisée.