Carrier-Q7-D59

Carrier Board for Qseven® Rel. 2.0 / 2.1 Compliant Modules in the 3.5” Form Factor. (Formerly CQ7-D59 )

Available in Industrial Temperature Range

Feuille de données

Contactez-nous pour plus d’informations et un devis

Contactez-nous

Détails produit

Info technique

Description	Carrier Board for Qseven® Rel. 2.0 / 2.1 Compliant Modules in the 3.5” Form Factor
Interfaces vidéo	LVDS Single/Dual Channel 18-24-bit + HDMI® connector or 2 x eDP connectors + Multimode Display Port
Stockage masse	1 x SATA connector with HDD Power connector 1 x M.2 Socket 2 2242 Key B SSD Slot microSD Slot on combo microSD + SIM connector
Réseau	Up to 2 x Gigabit Ethernet connectors 1 x M.2 Socket 2 2242/3042 Key B Slot for WWAN Modem Modules, connected to on-board miniSIM slot
Usb	2 x Superspeed USB 5Gbp Host port on Dual Type-A socket 1 x USB 2.0 Host ports on double Type-A sockets 1 x USB 2.0 Host on internal M.2 Socket 1 x USB 2.0 OTG port on micro-AB socket (USB port shared with USB 2.0 lanes of 1 x USB 3.0)
Audio	Audio interface on internal pin header
Ports sériels	4-wire RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector 2 x RS-232 Full-modem serial ports on internal header (need LPC interface from Qseven® module) CAN interface on PCB terminal block
Autres Interfaces	SPI internal pin header LPC Bus internal pin header SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header Front Panel Header 1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management) +12V Tachometric FAN connector Optional Debug USB port on miniB socket Optional MFG connector for JTAG programming of Qseven® module
Alimentation	24VDC ±5% through Micro-fit 2x2 power connector Coin cell battery Holder for CMOS and RTC
Température de fonctionnement	-40°C ÷ +85°C (Industrial temperature range) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensions	146 x 102 mm (5.75” x 4.02”)

Documentation

Data Sheet	[Datasheet] Carrier-Q7-D59 Rel 1.0
Manual	[Manual] CQ7-D59 Rel 1.1
Image	[Picture] CQ7-D59_front [Picture] CQ7-D59_persp

Part Number

Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.

Articles du produit groupé
QD59-0001-1121-I2	Description n° pièce 3.5” Qseven 2.1 Carrier board for Q7 modules with DP++ & eDP display interfaces, 2x GbE	Contactez-nous
QD59-0001-2111-I2	Description n° pièce 3.5” Qseven 2.1 Carrier board for Q7 modules with HDMI & LVDS interfaces, 2x GbE	Contactez-nous

Vous n'avez pas trouvé la solution que vous cherchez?

Le produit standard ne répond pas à vos besoins? SECO est à votre disposition pour développer ensemble une solution hardware et logicielle partiellement ou entièrement personnalisée.