Accueil
Carrier-Q7-A42 [Discontinued]

Skip to the beginning of the images gallery

Carrier-Q7-A42 [Discontinued]

Qseven® rel. 2.0 Compliant Carrier Board on 3.5” Form factor. (Formerly CQ7-A42)

Available in Industrial Temperature Range

Feuille de données

Wiki

Contactez-nous pour plus d’informations et un devis

Contactez-nous

Détails produit

Info technique

Description	The Qseven® Carrier-Q7-A42 is a full featured carrier board for Qseven® Rel. 2.0 compliant CPU modules, in 3.5” form factor. This carrier board can be used with any Qseven® Rel. 2.0 compliant module without incompatibilities and/or loss of functionalities. The board has been specifically designed for taking advantage of all possible features that can be offered by x86 and/or ARM architectures on Qseven® modules. SECOCQ7-3.5 has been developed most of all as a development board to explore the possibilities offered by Qseven® modules, but it could also be a good solution for low volumes production for companies that do not want or need to develop customised carrier board.
Interfaces vidéo	LVDS Dual Channel 24-bit + backlight connectors or 2xeDP Connectors DP++ or HDMI® connector
Stockage masse	1 x S-ATA with HDD Power connector 1 x mSATA Slot microSD Slot on combo microSD + SIM connector
Réseau	Up to 2 x Gigabit Ethernet connectors
Usb	1 x USB 3.0 Host port on Type-A socket 2 x USB 2.0 Host ports on double Type-A sockets 2 x USB 2.0 Host ports on internal pin header 1 x USB 2.0 OTG ports on micro-AB socket (USB Port shared with miniPCI-e slot)
Pci	miniPCI-e slot Full/Half size, combined with SIM card slot
Audio	Audio interface on internal pin header
Ports sériels	4-wires RS-232/RS-422/RS-485 configurable serial port on DB9 male connector 2 x RS-232 Full-modem serial ports on internal header (needs LPC interface from Qseven module) CAN interface on PCB terminal block
Autres Interfaces	SPI internal pin header LPC Bus internal pin header SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header Front Panel Header 1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management) +12V Tachometric FAN connector Optional Debug USB port on mini-B Socket Optional MFG connector for JTAG programming of Qseven® module
Alimentation	+12VDC Mini-fit Standard ATX power connector Coin cell battery Holder for CMOS and RTC
Température de fonctionnement	-40°C ÷ +85°C (industrial range) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensions	146 x 102 mm (5,75” x 4,02”)

Logiciel

Lien	SECO Technical Resources

Documentation

Data Sheet	[Datasheet] Carrier-Q7-A42 Rel 2.4
Manual	[Schematics] CQ7-A42 Rel 1.2 [Manual] CQ7-A42 Rel 2.0
Image	[Picture] CQ7-A42_front [Picture] CQ7-A42_perspective

Visitez notre boutique

Achetez et recevez immédiatement les produits SECO

Aller au boutique

Accessories

Vous n'avez pas trouvé la solution que vous cherchez?

Le produit standard ne répond pas à vos besoins? SECO est à votre disposition pour développer ensemble une solution hardware et logicielle partiellement ou entièrement personnalisée.

Carrier-Q7-A42 [Discontinued]

Détails produit

Visitez notre boutique

Vous n'avez pas trouvé la solution que vous cherchez?

Subscribe to newsletter