Inicio
VESTA

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

VESTA

3.5” SBC with NXP i.MX 8X Applications Processors

Available in Industrial Temperature Range

Ficha de datos

Para más información y recibir una cotización, póngase en contacto con nosotros

Contactarnos

Cpu

NXP i.MX 8 Family

Gráficas

GC7000Lite with up to 16 Execution Units

Conectividad

2x GbE; miniPCI-e slot; 1x USB3.0; 2x USB 2.0; Expansion header

Memoria

Soldered on-board LPDDR4 memory, frequency up to 1200MHz

Datos del producto

Información técnica

Descripción	3.5” SBC with NXP i.MX 8X Applications Processors
Cpu	NXP i.MX 8X family SoCs: Dual or Quad ARM Cortex®-A35 Cores + 1x Cortex® M4F core for real-time processing NXP i.MX8 QuadXplus, 4x ARM Cortex®-A35 Cores + 1x Cortex® M4F core for real-time processing NXP i.MX8 DualXplus, 2x ARM Cortex®-A35 Cores + 1x Cortex® M4F core for real-time processing
Núcleos máx.	4+1
Memoria	Soldered down LPDDR4 memory @ 1200MHz, 32-bit interface, up to 4GB
Gráfica	Embedded GC7000Lite GPU Supports OpenGL 3.0, 2.1, OpenGL ES 3.1, OpenCL 1.2 Full Profile and 1.1, OpenVG 1.1, and Vulkan Embedded VPU, supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-2, VC-1, RV10, VP8, H.263 and MPEG4.2t, HW encoding of AVC/H.264 2 independent displays supported
Interfaces vídeos	Factory options: eDP 4-lane interface + LVDS single Channel 18-/24-bit interface LVDS Dual Channel / 2 x LVDS Single Channel interface
Resolución vídeo	Up to 1080p60
Almacenamiento en masa	Soldered onboard eMMC 5.1 Drive, up to 64GB QSPI NOR Flash soldered on-board
Trabajo en red	Up to 2 x Gigabit Ethernet ports On-board WiFi 802.11 a/b/g/n + BT 5.0 module, optional
Usb	1x USB 3.0 Host ports on USB 3.0 Type-A socket 1x USB OTG Port on micro-AB connector (interface shared with USB 2.0 interface of USB 3.0 Type-A socket) 2x USB 2.0 Host ports on Dual Type-A socket 1x USB 2.0 Host port on miniPCI-e Slot
Pci	Optional mini PCI-e Slot
Audio	I2S Audio codec Mic In + Hp-Out on TRRS combo connector Line Out + 2x Mic-In interfaces on internal connector
Puertos de serie	1x UART on expansion connector, optionally with RS-232 interface 1x UART on expansion connector, optionally with RS-485 interface 1x CAN port, available at TTL Level on expansion connector or with CAN transceiver on dedicated connector 2x Debug UARTs on dedicated connectors
Otras interfaces	Available on expansion connector: • 16x GPIOs • I2C interface • 2x analog inputs • 1x PWM Power and reset button input on dedicated connector
Alimentación eléctrica	Factory option, +12VDC or +24 VDC input voltage DC power jack or 2-poles PCB terminal block for voltage supply RTC battery
Sistema operativo	Linux
Temperatura de funcionamiento	-40°C ÷ +85°C (Industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensiones	146 x 102 mm (3,5'' form factor)

Software

Enlace	SECO Technical Resources

Documentación

Data Sheet	[Datasheet] VESTA Rel 1.2
Manual	[Manual] VESTA Rel 1.0
Image	[Picture] VESTA_front [Picture] VESTA_back

Accessories

¿No encontró la solución que buscaba?

¿El producto estándar no satisface sus necesidades? SECO puede colaborar para desarrollar juntos una solución de software y un hardware personalizado total o parcialmente.

Para saber más