Modular Link MX93

DIN Mount Industrial Gateway with the NXP i.MX 93 SoC

Ficha de datos

Para más información y recibir una cotización, póngase en contacto con nosotros

Contactarnos

Cpu

NXP i.MX 93 SoC with NPU ML accelerator up to 0.5 TOPS

Conectividad

2x GbE, WLAN, optional WWAN module

Memoria

Up to 2GB LPDDR4

Datos del producto

Información técnica

Descripción	The Modular Link MX93 is a DIN Mount fanless industrial PC with modular design and wireless connectivity, designed for streamlined integration. It is Stackable through custom connector for Daughter systems.
Cpu	NXP i.MX93 2x Arm® Cortex®-A55 1.5GHz Arm® Cortex®-M33 @ 250Mhz Arm® Ethos™ U-65 microNPU
Memoria	Up to 2GB LPDDR4 3700MT/s
Interfaces vídeos	Optional HDMI® interface on MiniHDMI® connector
Resolución vídeo	Up to 1080p @60Hz
Almacenamiento en masa	Up to 32GB eMMC 5.1 drive soldered on-board
Trabajo en red	Up to 2x Gigabit Ethernet RJ45 connectors Optional WiFi (802.11 ac / a / b / g / n) + BT5.0 module soldered on-board, 2x external antennas* miniPCIe full-size card slot for optional LTE modem with nanoSIM slot, up to 2x external antennas** Certified *Certification upon request
Usb	Dual USB 2.0 Type-A connector (one with OTG capability)
Puertos de serie	1x RS-232/RS-422/RS-485 UART software configurable, on RJ12 connector 1x Debug UART on USB Type-C
Otras interfaces	Optional terminal block connectors with the following I/O: 2x digital outputs 4x digital inputs 1x button software configurable 1x button hardware reset 3x LEDs: power presence, WWAN activity, 1x software configurable. Other: TPM 2.0, RTC, watchdog Expansion: custom connector for stacking Daughter systems exposing I2C, SPI, GPIO, CAN, USB, UART interfaces and power
Alimentación eléctrica	+12÷36VDC
Sistema operativo	SECO Edgehog OS (Linux Yocto)
Temperatura de funcionamiento	-20°C ÷ +70°C* *Measured at any point of the heatspreader/heatsink during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensiones	140 x 96 x 36 mm (5.5” x 3.8” x 1.4’’)

Documentación

Data Sheet	[Datasheet] Modular Link MX93 Rel 1.0
Image	[Picture] Modular Vision MX93_Mother system [Picture] Modular Vision MX93_Daughter system [Picture] Modular Vision MX93_Assembled

¿No encontró la solución que buscaba?

¿El producto estándar no satisface sus necesidades? SECO puede colaborar para desarrollar juntos una solución de software y un hardware personalizado total o parcialmente.

Para saber más