|Description||The Development Kit contains the following material: - CSM-B79 Carrier Board - Serial Adapter Cables - 1x SATA power cable - Main power Adapter cable - 1x certified High Speed DP cable, DP1.4 standard compliant - 1x certified High Speed HDMI cable, HDMI 2.0 compliant - DP-to-HDMI adapter - 1x eDP cable Module not included. Must be purchased separately|
LVDS/MIPI-DSI connector, interface shared with 2x eDP connectors
SATA M 7p connector with dedicated power connector,
Up to 2xDual RJ-45 Gigabit Ethernet connectors
1 x USB 3.0 type A Socket
PCI-e x4 slot, interface shared with M.2 Slots
TRSS Mic In + Line Out Audio Jack
I2S Audio header
2 x CAN ports
eSPI pin header + Flash Socket
9-24V through dedicated Mini-Fit Jr 2x2 power connector or USB Type-C connector
RTC Coin cell battery holder
-40°C ÷ +85°C (industrial range)
*All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
|Dimensions||243.84 x 243.84mm (microATX)|
Prices hereunder are valid for SAMPLES (purchase limited to 3pcs).
If you would like to know prices for higher volumes, please contact us.
|KTDV-SM-B79.00||Part Number Description SMARC Cross Platform Development Kit||
Out of stock
Didn't find the solution you were looking for?
Does the standard product not meet your needs? SECO can sit down with you to develop a partially or fully-customised hardware and software solution.Find out more