Carrier-Q7-D59

Carrier Board for Qseven® Rel. 2.0 / 2.1 Compliant Modules in the 3.5” Form Factor. (Formerly CQ7-D59 )

Available in Industrial Temperature Range

Data sheet

Product details

Technical Info

Description	Carrier Board for Qseven® Rel. 2.0 / 2.1 Compliant Modules in the 3.5” Form Factor
Video Interfaces	LVDS Single/Dual Channel 18-24-bit + HDMI® connector or 2 x eDP connectors + Multimode Display Port
Mass Storage	1 x SATA connector with HDD Power connector 1 x M.2 Socket 2 2242 Key B SSD Slot microSD Slot on combo microSD + SIM connector
Networking	Up to 2 x Gigabit Ethernet connectors 1 x M.2 Socket 2 2242/3042 Key B Slot for WWAN Modem Modules, connected to on-board miniSIM slot
Usb	2 x Superspeed USB 5Gbp Host port on Dual Type-A socket 1 x USB 2.0 Host ports on double Type-A sockets 1 x USB 2.0 Host on internal M.2 Socket 1 x USB 2.0 OTG port on micro-AB socket (USB port shared with USB 2.0 lanes of 1 x USB 3.0)
Audio	Audio interface on internal pin header
Serial Ports	4-wire RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector 2 x RS-232 Full-modem serial ports on internal header (need LPC interface from Qseven® module) CAN interface on PCB terminal block
Other Interfaces	SPI internal pin header LPC Bus internal pin header SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header Front Panel Header 1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management) +12V Tachometric FAN connector Optional Debug USB port on miniB socket Optional MFG connector for JTAG programming of Qseven® module
Power Supply	24VDC ±5% through Micro-fit 2x2 power connector Coin cell battery Holder for CMOS and RTC
Operating Temperature	-40°C ÷ +85°C (Industrial temperature range) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
Dimensions	146 x 102 mm (5.75” x 4.02”)

Documentation

Data Sheet	[Datasheet] Carrier-Q7-D59 Rel 1.0
Manual	[Manual] CQ7-D59 Rel 1.1
Image	[Picture] CQ7-D59_front [Picture] CQ7-D59_persp

Part Number

Grouped product items
QD59-0001-1121-I2	Part Number Description 3.5” Qseven 2.1 Carrier board for Q7 modules with DP++ & eDP display interfaces, 2x GbE	Contact us
QD59-0001-2111-I2	Part Number Description 3.5” Qseven 2.1 Carrier board for Q7 modules with HDMI & LVDS interfaces, 2x GbE	Contact us