Startseite
VIKTORIA (formerly codenamed SBC-984)

Zum Anfang der Bildgalerie springen

VIKTORIA (formerly codenamed SBC-984)

SBC with NXP i.MX 6 Processor

Available in Industrial Temperature Range

Data sheet

Kontaktieren Sie uns für mehr Informationen und Angebote

Kontakt

CPU

Single-, Dual- and Quad- Core (ARM Cortex™A9 Cores)

Grafiken

2D/3D dedicated graphics processors

Konnektivität

miniPCI-e slot; CAN Bus; Wi-Fi add-on module;

Speicher

Up to 2GB DDR3L on-board

Produktbeschreibung

Technische Daten

Beschreibung	VIKTORIA is a Single Board Computer (only 80 x 67 mm) based on i.MX6 Multimedia Applications platform from NXP, a multimedia processor integrating a multicore Cortex™ A9 ARM Core (up to Quad Core processors), ideal for applications requiring multimedia capabilities and/or high levels of parallel computing, maintaining advantages offered by low-power consuming ARM architecture in an extremely reduced space.
CPU	NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors - i.MX6S Solo - Single core up to 1GHz - i.MX6DL Dual Lite - Dual core up to 1GHz per core - i.MX6D Dual - Dual core up to 1GHz per core - i.MX6Q Quad - Quad core up to 1GHz per core
Max. Kerne	4
Speicher	Up to 2GB DDR3L on-board (up to 1GB with i.MX6S)
Grafiken	Dedicated 2D Hardware accelerator Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D Dedicated Vector Graphics accelerator supports OpenVG™ (only i.MX6D and i.MX6Q) Supports up to 3 independent displays with i.MX6D and i.MX6Q Supports 2 independent displays with i.MX6DL and i.MX6S
Videoschnittstellen	1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface HDMI Interface Video Input Port / Camera connector (only with PCB rev. C or higher)
Videoauflösung	LVDS, up to 1920x1200 HDMI, up to 1080p
Massenspeicher	On-board eMMC drive, up to 8 GB mSATA Half-size slot (shared with miniPCI-express)
Networking	Gigabit Ethernet connector
USB	3 x standard USB 2.0 Type A 1 x USB OTG on micro-AB connector Internal USB for optional WiFi module
Pci	miniPCI-express slot, shared with mSATA (only PCI-e 1.1 and Gen2 are supported)
Audio	AC’97 Audio Codec Mic In, Line out internal pin header connector
Serielle Schnittstellen	1 x RS-232 serial port TTL debug UART (Tx, RX only) CAN interface internal connector
Andere Schnittstellen	I2C touch Connector Internal connector for power and reset buttons
Stromversorgung	+12VDC ± 10% Embedded additional RTC circuitry for lowest power consumption Optional RTC Battery with lead cable and connector
Betriebstemperatur	0°C ÷ +70 °C (commercial version) -40°C ÷ +85°C (industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Größe	80 x 67 mm (3,15” x 2,64”)

Software

SECO Technical Resources	SECO Technical Resources

Dokumentation

Data Sheet	[Datasheet] VIKTORIA Rel 3.1
Manual	[Manual] VIKTORIA Rel 4.0
Image	[Picture] VIKTORIA_back [Picture] VIKTORIA_front

Accessories

Sie haben nicht die Lösung gefunden, nach der Sie gesucht haben?

Das Standardprodukt erfüllt nicht Ihre Anforderungen? SECO bietet Ihnen die Möglichkeit, gemeinsam mit Ihnen eine teilweise oder komplett kundenspezifisch angepasste Hardware- und Softwarelösung zu entwickeln.

Mehr erfahren