ICARUS




Produktbeschreibung
![]() |
Pico-ITX SBC with the Intel® Atom® X6000E Series, Intel® Pentium® and Celeron® N and J Series (formerly Elkhart Lake) SoCs |
---|---|
![]() |
(*) IHS: Integrated heat spreader; TCC: Time Coordinated Computing |
![]() |
Soldered down LPDDR4-3200 memory, up to 16GB with IBECC supported only with Atom™ industrial SoCs Speed: 4267MT/s single rank (1GB / 2GB / 4GB / 8GB), 3733MT/s dual rank (16GB) |
![]() |
Up to 3 independent displays Integrated Intel® Gen11 UHD Graphics controller with up to 32 EU 4K HW decoding and encoding of HEVC (H.265), H.264, VP8, VP9, WMV9/VC1 (decoding only) |
![]() |
2x Multimode DisplayPort 1.4, on Dual DP++ Connector 1x eDP 1.3 or Single/Dual-Channel 18-/24-bit LVDS interface |
![]() |
Up to 4096x2160 @60Hz |
![]() |
Optional eMMC 5.1 drive soldered on-board M.2 SATA SSD slot (Socket 2 Key B Type 2242/3042) coupled to on-board Nano SIM slot. ** 1x SATA Gen3 7 pins M connector
** SATA SSD and WWAN functionalities share the same slot and are therefore mutually exclusive. |
![]() |
2x Gigabit Ethernet PHY with precision clock synchronization and synchronous Ethernet clock output for IEEE 1588 M.2 WWAN Slot for Modems (Socket 2 Key B Type 2242/3042) ** M.2 WLAN Connectivity Slot for Wi-Fi/Bluetooth (Socket 1 Key E Type 2230)
** SATA SSD and WWAN functionalities share the same slot and are therefore mutually exclusive. |
![]() |
Dual SuperSpeed USB 10Gbps Standard-A connector Dual USB 2.0 pin header |
![]() |
HD Audio codec / Cirrus Logic CS4207 Mic In, Line Out and S/PDIF Out, on pin header |
![]() |
2x RS-232/RS-422/RS-485 UARTs (software configurable) on pin header |
![]() |
8x GPIOs, I2C, SPI connectors 2x CAN connector Fan connector RST_BTN#, PWR_BTN# and activity LED signals on pin header Optional TPM 2.0 on-board |
![]() |
+12VDC Cabled coin cell battery for RTC |
![]() |
Microsoft® Windows 10 IoT Enterprise Linux Yocto |
![]() |
0°C - +60°C (Commercial version) * -40°C - +85°C (Industrial version) * * Measured at any point of SECO standard heatspreader for this product, during any and all times (including start-up). Actual temperature will depend on the application, enclosure, and/or environment. Each customer must consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated. |
![]() |
100 x 72 mm (3,93” x 2,83”) |

Sie haben nicht die Lösung gefunden, nach der Sie gesucht haben?
Das Standardprodukt erfüllt nicht Ihre Anforderungen? SECO bietet Ihnen die Möglichkeit, gemeinsam mit Ihnen eine teilweise oder komplett kundenspezifisch angepasste Hardware- und Softwarelösung zu entwickeln.
Mehr erfahren